3 Basic Operation of ECDIS 3-138
3.24 Multi Window
3.24.1 Using the Analog Meter
During voyage, you can display the “analog meter panel”on the display panel. You can see the HDG,
COG, set/Drift, CTS on the “analog meter panel”. Also, you can select the “Display Panel Setting”
panel to be displayed on the “analog meter panel”.
1) In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] - [(2) Analog Meter panel] in that order.
The following “analog meter panel” is displayed.
On the “analog meter panel”, items with the arrow mark (e.g. COG) are represented by the
indicators of the “analog meter panel”. The color of the item and that of the indicator match
each other. So, you can easily identify each indicator from the color.
COG (Gray arrow)
Course and speed (The vector of the vessel’s motion over
the ground and the course of the route selected)
Ship’s heading.
Log speed (speed through water)
Course to Steer
Note: It is displayed during Automatic Sailing only.
Current direction calculated by the difference between the
COG and HDG vector.
Current speed calculated by the difference between the COG
and HDG vector.
HDIG (Gray arrow)
CTS (Red arrow)
Set /Drift(Blue arrow)
The white arrow corresponds to the white
triangle.
(Color matches each other in it supports items)
To Next Page
Loading...
