2 Names and Functions
2-15
ECDIS
2.2.1.6 CHART Information for S-57/C-MAP
When left-clicked, shows the registered port name list.
Selected port name position will be displayed on the chart.
When left-clicked, EVENT mark is put at the own ship position.
SENC (System Electronic Navigation Chart) information level
selectable with the drop – down list button.
Base: Shows basic information such as geographic area.
(This is not intended to be sufficient for safe navigation.)
Standard: Shows standard information (First selection at power ON).
Other: Shows all information.
! : Shows all objects that belong to standard information.
The selecting Drop-down list is lit in green.
Scale of the chart being displayed
(Drop-down list shows all available scales.)
Range of the chart being displayed
(Drop-down list shows all available ranges).
Motion (selectable with the drop-down list button)
True: Your ship moves on the chart. When the ship reaches the
predetermined limit on the screen, the chart is automatically
shifted to keep display the ship.
Relative: Your ship stays on the screen and the geographic objects
move instead.
Free: Chart is displayed regardless of the ship’s movement.
Azmuth (selectable with the drop-down list button)
North Up: The chart always orients north.
Course Up: Your ship’s heading faces up on the screen.
(The chart rotates. After, the screen keeps the set direction.)
Rotation: You can rotate the chart by the specified amount using the degree
specifying box on this panel.
WPT Up: The direction from ship to “To WPT” always faces up on the screen.
(The chart rotates. This is effective in the relative mode.)
Rotational degree entry box for Azimuth “Rotation”.
Home: Displays your ship on the screen.
Zoom Area: You can magnify the specified area using a rubber band.
Zoom In: You can magnify the range.
Zoom Out: You can reduce the range.
When left-clicked, MOB (Man-Over-Board) panel opens.
To Next Page
Loading...
