JRC JAN-701B - Power off Operation

3 Basic Operation of ECDIS 3-24
3.3.4 Power OFF Operation
On the operation panel
Press the [POWER] key.
The power is turned off and the [POWER] key light goes out.
Note:
• If the [POWER] key is pressed during Navigation & Planning, gray screen will be displayed about
20 seconds, but the power will eventually be turn off.
3.3.5 Adjusting the Brightness and Sound Volume
Perform the following adjustments as required.
(1) Brightness of the screen ([BRILL])
Adjust the Brilliance control on the LCD monitor to adjust the brightness on the screen.
• JAN-701B • JAN-901B
[POWER] ke
y
When OFF: Unlit
Brilliance control
Brilliance control