JRC JAN-701B - ARCS Chart Display Options (ARCS Only)

3 Basic Operation of ECDIS 3-74
3.10 ARCS Chart Display Options
(ARCS Only)
The following display options are explained here.
●High resolution area selection with the cross cursor
●Larger chart/smaller chart selection (using [Larger Chart]/[Smaller Chart] on the display panel, [Zoom
In]/[Zoom Out] in the context menu)
●Various options accessible from the menu
3.10.1
Selecting Larger/Smaller Chart (ARCS
Only)
In the ARCS chart, you can select a larger or smaller chart using the display panel, menu, or the
[RANGE+/-] key on the operation panel.
On the operation panel
Press the [RANGE +] or [RANGE -] key.
On the display panel
Left-click the [Large Chart] or [Small Chart]
Each time you left-click the button, the larger chart or smaller chart will be displayed.
Note:
• An error message may be displayed when you switch a larger or smaller chart. For details of
error messages, see 9.2.1 “Alarm Information of ARCS Chart”.