JRC JAN-701B - Tools Panel

2 Names and Functions
2-17
ECDIS
2.2.1.8 Tools Panel
Refer to 3.15.3
Tool area switch button
EBL1/EBL2 edit mode switch button
Active: Displaying EBL line and having the right to operate by EBL dial.
VRM1/VRM2 edit mode switch button
Active: Displaying VRM line and having the right to operate by VRM dial.
Displaying position of cross point
on EBL1 and VRM1
Displaying position of cross point
on EBL2 and VRM2
Base point mode switch button
[Blank]: CCRP mode
D: Dropped point mode
Units of distance switch button
When left-click, units of VRM distance is changed.
[NM] -> [km] -> [sm] -> [NM] -> …
Azimuth of EBL switch button
T: True North mode
R: Bearing Reference mode
A
ctive/Inactive of EBL1/EBL2 switch button
Active: Displaying EBL line on chart display area
and displaying EBL azimuth
Inactive: Displaying “OFF”
A
ctive/Inactive of VRM1/VRM2 switch button
Active: Displaying VRM line on chart display area
and displaying VRM distance
Inactive: Displaying “OFF”