3 Basic Operation of ECDIS 3-113
ECDIS
3.15.4 Marker Setting
In the normal menu
Select [MENU] - [(7) Main] - [(0) Setting] - [(4) Marker Setting] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(6) Main] - [(0) Setting] - [(4) Marker Setting] in that order.
In the User Chart Editing menu
Select [MENU] - [(5) Main] - [(0) Setting] - [(4) Marker Setting] in that order.
The “Marker Setting” panel opens.
1) Display Unit Simultaneity:
[VRM1 distance unit], [VRM2 distance unit] button of cursor synchronize when making [Display Unit
Simultaneity] valid.
2)EBL/VRM Step :
See 3.15.1.1 “Selecting 1-step/2-step”
3) Cursor Read Out:
• Latitude/Longitude: When [Latitude/Longitude] is selected, latitude and longitude is displayed in the
cursor information pop up.
• Bearing/Range: When [Bearing/Range] is selected, bearing and range is displayed in the cursor
information pop up.
Distance unit synchronize .
To Next Page
Loading...
