7 Tools and Setting/Serviceman Menu
7-29
ECDIS
7.21.2 How to restore the data
It explains the data restore procedure as follows.
1) After “Serviceman” menu is displayed by “Code Input” panel, Select [(1) Serviceman] - [(7) Data
Backup/Restore] - [(2) Restore] in that order.
The “Data Backup/Restore” panel will be displayed.
2) Select source device from drop-down button “a”.
3) Select file that wants to be copied from box “b”, and left-click the [<<COPY] button (“c”) to
start restore.
Left-click [Select All] button (“d”) when you select all files.
4) Copied file is displayed that copy is completed in the box “e”.
* [Type (“f”)] and [Destination drive (“g”)] can’t be changed.
a)
b)
f)
e)
d)
e)
c)
To Next Page
Loading...
