JRC JAN-701B - Multi View Screen

3 Basic Operation of ECDIS 3-86
3.11.1 Multi View Screen
You can display two screens, View 1 and View 2 simultaneously. The selected screen has active title
bar as shown in the above figure. The other side screen is inactive.
To change a screen actively, it left-clicks the screen to want to choose. At this time, off-center will be
used to place the cursor in the center of the screen for that view. If off-center is not desired, move the
cursor to the title bar of the view, then left-click.
1) In the normal menu
Select [MENU] - [(6) Chart] - [(1) Multiview] in that order.
2) Left-click one of the submenus to select the multi view type.
Then, the selected multi view is displayed.
- Single View
･ When displaying Multi Window, the screen will return to the normal screen (single view).
- Top Bottom
･ Chart is displayed dividing top and bottom.
･ View1 is displayed in upper end title bar of chart and View2 is displayed in lower end title
bar.
- Right Left
･ Chart is displayed dividing right and left.
･ View1 is displayed in right end title bar of chart and View2 is displayed in left end title
bar.
- Right Top View
･ View2 is displayed in the upper right of View1.
･ View1 title bar is displayed in lower end of View1 and View2 title bar is displayed in
upper end of View2.
- Left Top View
･ View2 is displayed in the upper left of View1.
･ View1 title bar is displayed in lower end of View1 and View2 title bar is displayed in
upper end of View2.
- Right Bottom View
･ View2 is displayed in the lower right of View1.
･ View1 title bar is displayed in upper end of View1 and View2 title bar is displayed in
lower end of View2.
- Left Bottom View
･ View2 is displayed in the lower left of View1.
･ View1 title bar is displayed in upper end of View1 and View2 title bar is displayed in
lower end of View2.
- Select Area
･ A selected area will be displayed as view 2.
(Refer to 3.11.2 Selecting an Area for more information)
- Wide Range View
･ [Wide Range View] is displayed in the display panel.
(Refer to 3.11.3 Wide Range View Screen for more information)