11
Operation of Multi Window
11-4
Configuration for Each Graph
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(0) Setup...] in that order, and the “Setup” panel will be
displayed. Press a tab written the name of the block will change each display block setting.
Engineer can only set each data display On/Off by entering Password in Maintenance window.
These buttons are common buttons of the “Setup” panel.
[Exit] button: Exit the Conning Display and display Startup screen.
[OK] button: Accept settings and close “Setup” panel.
[Cancel] button: Cancel change setting and close “Setup” panel.
Click tab of setting block
To Next Page
Loading...
