JRC JAN-701B - Disconnect Automatic Sailing

6 Automatic Sailing
6-12
6.3.5 Disconnect Automatic Sailing
1) In the normal menu
Select [MENU] - [(3) AUTO Sail] - [(3) Disconnect] in that order.
Then, the "Confirmation" panel will appear.
2) Left-click the [OK] to disconnect AUTO Sail.
[Cancel] is left-click when canceling “Disconnect AUTO Sail”.
Note:
When execute disconnect, the following menu changes invalidly.
・ [Menu] - [(3) AUTO Sail] - [(1)Start]
・ [Menu] - [(3)AUTO Sail] - [(3)Disconnect]
By exit to “Navigation & Planning” and start again, it returns in the validity.