3 Basic Operation of ECDIS 3-73
ECDIS
3.9 Selecting a S-57 Chart (S-57
Only)
After power ON, the chart on which your ship exists is automatically called up so that the voyage can be
monitored at all times. When you want to display other chart, perform the following operation.
1) In the normal menu
Select [MENU] - [(6) Chart] - [(4) Select S-57 Chart] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(5) Chart] - [(4) Select S-57 Chart] in that order.
In the User Chart Editing menu
Select [MENU] - [(4) Chart] - [(4) Select S-57 Chart] in that order.
The “Select Chart” panel opens.
2) Left-click the chart name you want and then left-click the [OK] .
The “Select Chart” panel closes and the selected chart is displayed on the screen.
By pressing the [HOME] on the display, you can display the chart on which your ship is.
To Next Page
Loading...
