JRC JAN-701B - Setting Chart Fix Mode

3 Basic Operation of ECDIS 3-70
3.7.3 Setting Chart Fix Mode
Regardless of Motion mode or Azimuth mode, the currently displayed chart will be fixed and no other
charts will be loaded.
Note:
• For C-MAP Ed.3, Chart Fix mode is not available.
(1) Setting Fix mode using the menu
1) In the normal menu
Select [MENU] - [(6) Chart] - [(5) Fix View] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(5) Chart] - [(5) Fix View] in that order.
In the User Chart Editing menu
Select [MENU] - [(4) Chart] - [(5) Fix View] in that order.
The chart display becomes fixed.
2) Select [Fix View] in that order again to cancel Fix mode.
Example use of Chart Fix mode:
• If the chart (JP440JBE) is zoomed out while Chart Fix mode is turned off, the wide area chart
(JP24NC9G) will be loaded to replace the chart automatically.
• If the chart (JP440JBE) is zoomed out while Chart Fix mode is turned on, it is fixed in the display, and
no other chart will be loaded to replace it.
1:30,000
JP44OJBE
1:250,000
JP24NC9G
1:30,000
JP44OJBE
1:250,000
JP44OJBE