7 Tools and Setting/Serviceman Menu
7-13
ECDIS
7.8 Setting Date/Time
When your ship is in the same time zone as the Coordinated Universal Time (UTC), Time Zone is 0:00,
and UTC and ship’s local mean time (LMT) are the same.
1) In the normal menu
Select [MENU] - [(7) Main] - [(0) Setting] - [(3) Date/Time Setting] in that order.
In the Table Editing menu, Graphic Editing menu, User Chart Editing menu
Select [MENU] - [(6) Main] - [(0) Setting] - [(3) Date/Time Setting] in that order.
The “Date/Time” panel opens.
2) It chooses each clause eyes and it inputs value to the value entrybox..
Left-click the [OK] button on the panel to close the panel.
It closes a panel without changing contents when clicking the [Cancel] button.
It saves contents without closing a panel when clicking [Apply] button.
The following items can be set:
a) LMT Date/LMT Time
Set the date/time when “MANUAL” has been selected in the date/time data source setting.
For details, see 7.5.4 “Date Data Source Setting”.
• Enter date/month/year/ hour:minite:second numerals in the numeric input box.
b) Time Zone
Set the time difference when “MANUAL” has been selected in the time zone data source
setting. For details, see 7.5.5 “Time Zone Data Source Setting”.
You can also use [+30min] and [-30min] button to set time.
(E=“+”, W=“-”)
The LMT and the time zone are displayed at the top of the display panel as follows:
Time zone
LMT
To Next Page
Loading...
