4 Route Planning
4-51
ECDIS
4.1.3.5
Editing a Previous Route File (Graphic Editor)
This explanation is made according to (2) “Editing the route file (Graphic Editor)” in 4.1.3.3 “Operation
Flowchart for Graphic Editor (Graphic Editing)”.
(1) Unloading the selected route before starting
Before starting, left-click the ROUTE drop-down button on the
display panel, and then left-click the [UNLOAD] to clear any
route on the screen.
(2) Entering the Graphic Editing mode
1) In the normal menu
Select [MENU] - [(2) Route] - [(1) Route Planning] - [(2) Graphic Editor] in that order.
- When you open the Graphic Editing menu, rotate the trackball to move the cursor on upper
part on screen.
Then, the Graphic Editing menu title bar opens. To close it, left-click any position on the chart.
[Graphic Editing Menu]
(3) Selecting the route file
1) To select the route file, left-click the [Open] button.
In the Graphic Editing menu
Select [MENU] - [(1) File] - [(2) Open] in that order.
The “Open Route File” panel opens.
2) Select a route file you want to edit, and left-click the [OK] button.
Then, the selected file opens on the screen. Now you can edit the file in the same way as when
you make a new route file.
To Next Page
Loading...
