JRC JAN-701B - Alarm Information of C-MAP Ed.3 Chart

9
Reference
9-9
ECDIS
9.2.2 Alarm Information of C-MAP Ed.3 Chart
This section explains the details of the alarm information that may appear while C-MAP Ed.3 chart is
displayed on ECDIS.
No. Error message Measures to take
1 C-MAP Ed.3 : No license installed. License has not yet been installed. Register the license in Chart
Portfolio.
2 C-MAP Ed.3 : One or more licenses expired. Please
contact your C-MAP agent for a license renewal.
The license is invalid. The chart is displayed only for 15 minute
after it is started. Contact your C-MAP agent to request license
renewal.
3 C-MAP Ed.3 : One or more licenses will expire at
DD/MM/YYYY. Please contact your C-MAP agent
for a license renewal.
The license will expire on DD/MM/YYYY. It will expire in less than
2 months. Contact your C-MAP agent to request license renewal.
4 C-MAP Ed.3 : Key device (e-Token) not found. C-MAP security device (eToken) cannot be recognized. Press
[POWER] to exit the software and OS, and then, press [POWER]
again to start the equipment.
5 C-MAP Ed.3 : COM error Com port error was detected. Press [POWER] to exit the
software and OS, and then, press [POWER] again to start the
equipment.
6 C-MAP Ed.3 : Unknown error An unknown error was detected. Press [POWER] to exit the
software and OS, and then, press [POWER] again to start the
equipment.