3 Basic Operation of ECDIS 3-29
ECDIS
Tool area on display panel operation:
1) Tool area is switched from [Tools] to [Brilliance] with tool area switch button.
2) Display color is changed by [Day-Night level] switch button.
Each time you press the key, the display color changes. The order which a display color switches
over to is the same as the key operation. (Refer to "Key operation".)
Note:
• When you change display colors, note that a [Night] color especially can make displayed
information difficult to read/see.
[Day-Night level] switch button
To Next Page
Loading...
