3 Basic Operation of ECDIS 3-105
ECDIS
2) Left-click either “1 Step” or “2 Step” and then press the [OK] button to close the panel.
• 1 Step: Quicker operation (Both EBL and VRM appear on the chart.)
• 2 Step: Step-by-step operation (First EBL and then VRM)
Tips: Useful context – Abort
During EBL/VRM operation, for example, you can cancel the current operation step by the following
procedure.
Right-click at any position on the
chart to open the context menu.
“Abort” context menu will open.
Left-click
“Abort” to abort
the current operation step.
Rotate the trackball to move
the cursor on the “Abort”.
To Next Page
Loading...
