3 Basic Operation of ECDIS 3-118
2) In the “Location/Attributes - Event Mark” panel, perform the following editing operation.
• Enter time if you want to correct the displayed time.
• Enter comment on the event.
• You can edit the minimum scale and maximum scale that limit the display of the Event Mark.
• To fix the contents and close the panel, left-click the [OK] .
You will see that the Event Mark (
) is put on the chart.
[Apply] : It is possible to do setting in the valid without closing a panel.
(3) How to delete the Event Mark
1) In the normal menu
Select [MENU] - [(6) Chart] - [(1) Marking/Highlighting] - [(5) Delete Event Mark] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(5) Chart] - [(1) Marking/Highlighting] - [(5) Delete Event Mark] in that order.
In the User Chart Editing menu
Select [MENU] - [(4) Chart] - [(1) Marking/Highlighting] - [(5) Delete Event Mark] in that order.
The “Delete Event Mark” panel opens.
2) Left-click the [No.] you want and then left-click the [Delete].
The panel closes and the selected Event Mark is deleted from the chart
3) Left-click [Close] , ”Delete Event Mark” panel is close.
Position of the Event Mark
Event Mark
To Next Page
Loading...
