3 Basic Operation of ECDIS 3-129
ECDIS
2) Delete LOP
Select [(7)Main]-[(4)LOP]-[(2)Delete All LOP]. Then All LOP line is deleted.
3) Select Cross Point
When two LOP (or TPL) or more is set, cross point position is displayed. “Select Cross Point”
panel is displayed when you left-click this button. When LOP ( or TPL) is set 3 lines and more,
information message is displayed and cross point is displayed by select 2 lines.
Latitude, Longuitude:
Display the position cross point.
When there are two points or more, left-click
the position list and select crossed LOP point.
Reference Point
Adjust own ship’s position to selected cross
point.
Close
Close “Select Cross Point” panel.
To Next Page
Loading...
