3 Basic Operation of ECDIS 3-140
The menu where a window is displayed:
(2)Analog Meter (See 3.24.1)
(3)Climate
(4)Draft
(5)Current Wind
(6)Gyro Rudder Graph
(7)Course Bar
(8)Ship
(9)Engine Graph
(1)Depth Graph
(2)Current
2) To close multi window
In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] and select to want to close more than the
menu, the supporting menu disappears a check mark and a panel is close.
3) Preset the multi window display condition
The condition of the multi window can be saved and preseted. (either valid or invalid, and the
position to display, and so on )
Save the multi window condition:
In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(7) PreSet Save] in that order.
It maintains the display condition and the display position of the present multi window. When
doing the same operation once again from the menu, the display condition and the display
position maintain new one.
Preset the multi window condition:
In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(1) PreSet] in that order.
It presets the display condition and the display position of the multi window to have maintained.
4) Setting to the multi window display
It changes the setting of each multi window. for the details of the setting, refer to the instruction
manual of each of the facilities.
In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(0) Option...] in that order.
To Next Page
Loading...
