3 Basic Operation of ECDIS 3-193
ECDIS
The setting range is as the following:
[Bearing]: 0.0°- 9.9°
[Range]: 0m - 999m
[Course]: 0°- 99°
[Speed]: 0kn - 99kn
Association is valid to 125 % of the set value.
Association Target can be set in valid or invalid.
It becomes valid when putting a check.
It is connected with the [Association] of the display
panel.
[Synchronized with TTD] is valid only the AIS data
receive from the Radar
It preference which of AIS or TT and it can be set.
It sets [Bearing][Range][Course][Speed].
To Next Page
Loading...
