4 Route Planning
4-18
[Entry example: The route displayed on the chart corresponds to the list data.]
(5) Saving the route file
1) Left-click the [Save] button.
The “Save as Route File” panel opens.
2) Enter the route file name and comment. Left-click the [OK] button.
3) Left-click the [Close] button.
Close the file. Then, the system exit the Table Editing mode and the list and table editing buttons
are cleared from the screen.
• The route file can be edited even after it is saved.
Note:
• The route cannot be created if the GC leg extends over 120° and more in longitudinal
direction.
To Next Page
Loading...
