4 Route Planning
4-36
(2) Button functions
Left-click to exit the Graphic Editing mode.
Left-click when making a new route file.
Left-click to select a route file previously made.
Left-click when saving the route file currently made.
Left-click when printing the WPT contents. (Only when connected to a
printer)
Left-click when adding a WPT to the W000 or the to the last WPT.
Left-click when inserting a WPT in the course of the route.
Left-click when moving a WPT.
Left-click when deleting a WPT.
Left-click when opening the information panel of the selected WPT or leg.
Left-click to check if the route exceeds the limit (leg length, etc.).
This button is available for TCS mode only.
It shifts to Table Editor.
When editing a route, the editing can be continued on Table Editor.
To Next Page
Loading...
