4 Route Planning
4-40
(4) Making a route
Making a route using buttons on the screen:
The following shows the way how to make a route using the buttons on the screens. (You can mix
the EBL/VRM operation with this button operation. See 4.1.3.8 “Creating a Route Using EBL/VRM
Keys and Dials”.) Operate while watching the cursor position displayed at the bottom of the display
panel.
Note:
• If [(1) Use EBL/VRM] is on (with a checkmark), operation using EBL/VRM is to be performed.
If [(2) Use Assistant Circle] is on, operation using supplemental lines is to be performed. To
turn on/off each item, select the menu. Operation using EBL/VRM and operation using
supplemental lines cannot be turned on at the same time.
While [(1) Use EBL/VRM] is on, turning on [(2) Use Assistant Circle] turns on operation using
supplemental lines. Conversely, while [(2) Use Assistant Circle] is on, turning on [(1) Use
EBL/VRM] turns on operation using EBL/VRM.
To Next Page
Loading...
