4 Route Planning
4-56
5) Turn the EBL/VRM dial to move the point of intersection to the next WPT (W001), and left-click
there.
6) Follow the steps 4) and 5) until you make the final WPT.
How to Edit the Route:
After pressing the [Add] or [Insert/Move WPT] button on the screen, you can add, move, or insert a
WPT in the same EBL/VRM operation as above.
(This circle is not displayed.)
Left-click
Red line
(Port side)
Green line
(Starboard side)
To Next Page
Loading...
