6 Automatic Sailing
6-6
b) Drift Correction
When the ship’s speed is more than 5 knots, then control according to [None], [High], [Mid]
and [Low] setting will take drift into consideration.
c) Dead Band
When dead band is set, a stable course is maintained. Therefore, within the specified
range centered on the route, the set heading is the same as the route heading.
Dead band can be set within the range from 0.001 NM to 0.999 NM.
d) AUTO Stop (Only TCS category B)
Time until automatic sailing stop automatically when turning operation is not done even if
WOL is passed is set.
AUTO Stop can be set within the range from 0 min to 4 min.
This item is not displayed when using Normal type or TCS category C of A/P type.
Set heading
Drift
To Next Page
Loading...
