2 Names and Functions
2-3
ECDIS
Table 2.1 Names and Functions
No. Name Function
1 POWER Turns the power on.
2 PWR FAIL Indicates the AC power supply error.
(See 10.4 “The PWR FAIL Lamp and Power Supply Input.”)
3 PWR ACK Stops the alarm at occurrence of PWR FAIL.
(See 10.4 “The PWR FAIL Lamp and Power Supply Input.”)
4 VIDEO
*1
Adjusts the brightness of radar echoes.
5 RAIN
*1
Suppresses rain/snow clutter.
6 SEA
*1
Suppresses sea clutter.
7 GAIN
*1
Adjusts receiver gain.
8 RANGE ＋ Range up.
－ Range down.
9 TURN
*2
Starts turning.
10 ALARM ACK Press to acknowledge an alarm.
11 ROUTE PLAN Starts/ends route the route planning function (table editor).
12 DAY/NIGHT
Changes the display color of the screen to suit the lighting conditions of the bridge.
13 PANEL Dims the operation panel in five steps.
14 RADAR
*1
Turns ON/OFF the radar echo display on the chart.
15 AUTO SAIL
*2
Starts/Stops auto sail.
16 MENU Display Menu title bar.
17 AIS/TT Selects AIS/TT display.
18 HOME Returns the own ship’s position into the display.
19 MOB MOB (Man-Over-Board) panel opens.
When hold down for more than three seconds, MOB panel is closed.
20 USER
21 OPTION 1
22 OPTION 2
One of the following user-registered functions is executed:
(See 7.7 “Setting the User Key.”)
- Starting the route graphic editor
- Starting the chart editor
- Displaying the chart option setting screen
- Displaying the own ship’s option setting screen
- Adding to the port name list
- Displaying the port name list
- Changing the ARCS’s active panel
- Loading ARCS’s low resolution
- Displaying the logbook
- Printing the screen contents
- Saving Screen
- Saving chart option setting
- Displaying chart option setting list
- Changing S-57/C-MAP chart display BASE temporarily
- PreSet Multi Window
23 EBL1/EBL2 Turns the EBL (Electronic Bearing Line) ON/OFF, and operates the
EBL.
24 VRM1/VRM2 Turns the VRM (Variable Range Marker) ON/OFF, and operates the
VRM.
To Next Page
Loading...
