9
Reference
9-11
ECDIS
When Base CD is used (continued)
No. Error message Cause Procedure
10 error(0x0000000A)
error: Attribute
The attribute value of an
object defined in a chart file
on the chart CD is incorrect.
This message indicates a fatal error of the chart CD. The
chart CD cannot be used for import or update processing.
Clean the CD-ROM, and perform the import processing
again. If the same error recurs, contact the chart distributor.
11 error(0x0000000B)
error: Instruction
Address
Internal memory address
error (instruction section)
Contact selling agency of chart.
12 error(0x0000000C)
error: Instruction offset
Internal memory offset error
(instruction section)
Contact selling agency of chart.
13 error(0x0000000D)
error: PL Rule Memory
Memory allocation error (PL
rule section)
Contact selling agency of chart.
14 error(0x0000000E)
error: PL Rule
Information
Data acquisition error (PL
rule section)
Contact selling agency of chart.
15 error(0x0000000F)
error: Attribute
Information
Chart-object attribute
acquisition error
Contact selling agency of chart.
16 error(0x00000010)
error: Enc File write
SENC file write error Contact selling agency of chart.
17 error(0x00000011)
error: Object Class get
Chart-object information
acquisition error
Contact selling agency of chart.
18 error(0x00000012)
error: Directory create
File path error Contact selling agency of chart.
19 error(0x00000013)
error: Topology
A chart object on the chart
CD contains a topology error.
This message indicates a fatal error of the chart CD. The
chart CD cannot be used for import or update processing.
Clean the CD-ROM, and perform the import processing
again. If the same error recurs, contact the chart distributor.
20 error(0x00000014)
error: Area Object Link
A chart area object on the
chart CD contains a link error.
This message indicates a fatal error of the chart CD. The
chart CD cannot be used for import or update processing.
Clean the CD-ROM, and perform the import processing
again. If the same error recurs, contact the chart distributor.
21 error(0x00000015)
error: Line Object Link
A line object on the chart CD
contains a link error.
This message indicates a fatal error of the chart CD. The
chart CD cannot be used for import or update processing.
Clean the CD-ROM, and perform the import processing
again. If the same error recurs, contact the chart distributor.
22 error(0x00000016)
error: Object outside
range
A chart object on the chart
CD is beyond the boundary.
This message indicates a fatal error of the chart CD. The
chart CD cannot be used for import or update processing.
Clean the CD-ROM, and perform the import processing
again. If the same error recurs, contact the chart distributor.
To Next Page
Loading...
