JRC JAN-701B - Page 476

9
Reference
9-60
9.7 Set value list when starting ECDIS
The following description is list of set when starting “Navigation & Planning”.
(1) Display Panel
No. Category Contents Set when starting
1 HDG Value input from sensor
2 STW Value input from sensor
3 COG Value input from sensor
4 SOG Value input from sensor
5 Time Value input from sensor
6 Position Value input from sensor
7 CTS Value input from sensor
8 Vector Value input from sensor
9
Own Ship Information
Depth Value input from sensor
10 RADAR (Display ON/OFF) OFF
11 TT1 (Display ON/OFF) OFF
12 TT2 (Display ON/OFF) OFF
13 AIS (Display ON/OFF) OFF
14
Other Ship Information Setting
Association (ON/OFF) The value when ending last time
15 Ring (ON/OFF) The value when ending last time
16
AIS Filter
Sector (ON/OFF) The value when ending last time
17 Auto Sail Mode NotRDY
18 Course change Mode (blank)
19 Sailing Status (blank)
20
Auto Sail Status
Steer mode (blank)
21 Route UNLOAD
22 To WPT (blank)
23 DIST ****.*
24
Route Watch
BRG ***.*
25 DEST (WPT) 0
26 DEST (Distance) ****.*
27 SPD (Actual/CALC) Actual
28 SPD (Speed) **.*
29 TTG *****:**:**
30
Route Information - CALC
ETA **_** **:**