JRC JAN-701B - Page 49

2 Names and Functions
2-11
ECDIS
Other Ship Information displaying procedure:
① RADAR1 or RADAR2
When selecting [MENU]–[(7) Main]–[(9) Radar Overlay]–[(1)Radar 1], it is displayed with [RADAR1].
When selecting [MENU]–[(7) Main]–[(9) Radar Overlay]–[(2)Radar 2], it is displayed with [RADAR2]..
It becomes blank when making the check of [Radar Overlay] invalid.
[RADAR1] or [RADAR2] is as displayed even if it does an off center in the radar overlay and it makes
Radar Overlay off.
② TT1 (Target Track 1)
Following is displayed by "TT1" input data when selecting [MENU]–[(1)AIS/TT]-[(1) TT1].
･ TT1(REL)
･ TT1(GND)
･ TT1(SEA)
Blank is displayed when not selecting [MENU]–[(1)AIS/TT]-[(1) TT1].
When using ground-speed stability of Internal TT.
[TT1-INT(GND) ]is displayed in ① box, and ② box is blank displayed.
When using through-the-water-speed of Internal TT.
[TT1-INT(SEA) is displayed in ① box, and ② box is blank displayed.
③ TT2 (Target Track 2)
Following is displayed by "TT2" input data when selecting [MENU]–[(1)AIS/TT]-[(2) TT2].
･ TT2(REL)
･ TT2(GND)
･ TT2(SEA)
Blank is displayed when not selecting [MENU]–[(1)AIS/TT]-[(2) TT2].
④ AIS
"AIS" is displayed when selecting [MENU]–[(1) AIS/TT]-[(3) AIS].
Blank is displayed when not selecting [MENU]–[(1) AIS/TT]-[(3) AIS].