JRC JAN-701B - 11.1 Operation of Multi Window

11
Operation of Multi Window
11-2
󲨩󲨩󲨦󲨩󲨘 Operation of Multi Window
11.1.1 Selecting Multi Window
Multi Window can be select in the following way. (This is optional function.)
1) In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] and select to want to display more than the menu, the
supporting menu has a check mark and the panel is displayed.
Preset the multi window display condition:
The condition of the multi window can be saved and presented.
●Save the multi window condition:
In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(7) PreSet Save] in that order.
It maintains the display condition and the display position of the present multi window. When
doing the same operation once again from the menu, the display condition and the display
position maintain new one.
●Preset the multi window condition:
In the normal menu
Select [MENU] - [(7) Main] - [(8) Multi Window] – [(1) PreSet] in that order.
It presets the display condition and the display position of the multi window to have maintained.