12
Display and View of Multi Window
12-3
Conning Display
12.1.1.1 Rearranging Blocks
The blocks can be dragged and dropped. The screen is broken down into a transparent matrix made up
of 64 equally sized sections. A block can be moved to a give part of the matrix by aligning its upper left
corner.
12.1.1.2 Changing Block Size
The size of a block can be changed by placing the cursor over a corner of the block, then dragging the
corner to resize the block. (However, there is a limit to the size that is determined by the mesh size,
displayed characters.)
Blocks
To Next Page
Loading...
