3 Basic Operation of ECDIS 3-4
Major cursors
Lens Cursor
Appears when area zoom function is
selected. The rubber band can be
drawn to magnify an area.
Hand Cursor
Appears when the cursor is moved
while pressing and holding down the
left button in the chart area. You can
grip and move the chart freely.
Cross Cursor
Indicates the position on the chart.
Marking Cursor
Appears while operation in following
modes.
・Information Mark
・Tidal Stream Mark
・Highlight
・LOP
Edit Cursor
Appears while moving object in User
Map Editor/ Manual Update and
Route Graphic mode. Used to change
objects and WPTs.
Box Cursor
Indicates the position on the chart
while in User Chart Edit/Manual
Update mode and Route Graphic
mode.
Arrow Cursor (Pointer)
Indicates the position on the display
panel, menu title bar and panel
(dialogue box, etc.)
Select Chart Under Cursor (ARCS)
Appears while select chart in following
mode.
・Select Chart Under Cursor
(ARCS Only)
EBL/VRM Setting Cursor
Appears while setting EBL/VRM in
context menu.
Offset Cursor
Appears while setting offset in Adjust
Cursor mode.
Auto Mode Cursor
In each of the following modes, it
changes to the cursor with the angle.
・Click EBL/VRM line and operating
・Click AIS Filter line and operating
・Click AZ Function line and operating
?
OffSt
To Next Page
Loading...
