3 Basic Operation of ECDIS 3-32
(4) Displaying the alarm list
1) At any time, left-click the [Alarm List] button on the display panel.
Then, the “Alarm List” panel opens.
• If you open the “Alarm List” panel when the alarm blinks, the alarm button in the “Alarm List”
also blinks.
After confirmation, you can acknowledge the blinking alarm by left-clicking the [ACK] button.
You can also open the “Alarm List” panel from the menu:
In the normal menu
Select [MENU] - [(7) Main] - [(3) Test] - [(1) Alarm Log] in that order.
In the Table Editing menu, Graphic Editing menu
Select [MENU] - [(6) Main] - [(3) Test] - [(1) Alarm Log] in that order.
In the User Chart Editing menu
Select [MENU] - [(5) Main] - [(3) Test] - [(1) Alarm Log] in that order.
To Next Page
Loading...
