EasyManuals Logo

Juniper EX4300 Series User Manual

Juniper EX4300 Series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #272 background imageLoading...
Page #272 background image
Table 74: System Informaon
(Connued)
Field Descripon
For an EX8208 switch, the values displayed in
Inventory details eld are 1–3 CB and 0–8 FPC. CB,
or Control Board, refers to SRE and SF modules.
FPC refers to line cards.
For EX8216 switches, the values displayed in
Inventory details eld are 1–2 CB and 0–16 FPC.
CB, or Control Board, refers to RE modules and
FPC refers to line cards.
For an XRE200 External Roung Engine in an
EX8200 Virtual Chassis, the value displayed in
Inventory details is 1 XRE. XRE refers to RE
modules. For XRE200 External Roung Engines
congured as a Virtual Chassis, the values displayed
in Inventory details are 1–2 XRE and 0–4 LCC,
where LCC refers to the EX8200 line card chassis.
Junos image Indicates the version of the Junos OS image. In a
Virtual Chassis conguraon, the Junos OS image of
the primary switch is displayed by default. To display
the Junos OS image of a specic switch, click the
image of that switch.
NOTE: For EX4650, EX4400, EX4100, and EX4100-F
switches, the Junos OS image of the primary switch is
displayed by default. To display the Junos OS image of
a specic switch, click the image of that switch.
Boot image Indicates the version of the boot image that is used. In
a Virtual Chassis conguraon, the boot image of the
primary switch is displayed by default. To display the
boot image of a specic switch, click the image of that
switch.
NOTE: For EX4650, EX4400, EX4100, and EX4100-F
switches, the boot image of the primary switch is
displayed by default. To display the boot image of a
specic switch, click the image of that switch.
262

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX4300 Series and is the answer not in the manual?

Juniper EX4300 Series Specifications

General IconGeneral
Product SeriesEX4300 Series
Power ConsumptionVaries by model and configuration
Virtual Chassis TechnologyUp to 10 switches
SoftwareJunos OS
Ports24-port and 48-port models
10GBASE SFP+ PortsUp to 8 ports
40GBASE QSFP+ Ports2
Uplink PortsUp to 4 ports
Jumbo FramesUp to 9216 bytes
Operating Temperature0°C to 45°C
Relative Humidity5% to 90% noncondensing
Input Voltage100 to 240V AC
Power SupplyAC or DC
Power Supply OptionsAC or DC
StackingYes
Layer 2 FeaturesIncludes VLAN, STP, RSTP, MSTP, LACP
Layer 3 FeaturesOSPF, BGP
ManagementCLI, Web GUI, SNMP
Security FeaturesDHCP snooping
QoS8 queues per port, DSCP
Storage Temperature-40°C to 70°C

Related product manuals