Juniper EX4300 Series User Manual

Table 11: LCD Panel Menu Opons in EX4300 Switches (Connued)
Menu Label Descripon
STATUS In the Status menu, press Menu to cycle through the following informaon:
• VCPs status: Up or Down
Display the status of VCPs on the switch. This opon is supported only on EX4300
switches in a Virtual Chassis conguraon. This opon is not supported on standalone
EX4300 switches.
• Power supply status: OK, Failed, or Absent
• Fan status and Temperature status.
•
Fan status: OK, Failed, or Absent
•
Temp status: OK, High, or Shutdown
•
Junos OS version for EX Series switches loaded on the switches.
•
EXIT STAT MENU?
Choose one of the following:
• Press Enter to exit the Status menu and go to the Maintenance menu.
• Press Menu to display the VCPs status again.
You can disable the Status menu or the opons in the Status menu in the LCD panel. See
Conguring the LCD Panel on EX Series Switches (CLI Procedure) .
57

Juniper EX4300 Series Specifications

General

Product Series	EX4300 Series
Power Consumption	Varies by model and configuration
Virtual Chassis Technology	Up to 10 switches
Software	Junos OS
Ports	24-port and 48-port models
10GBASE SFP+ Ports	Up to 8 ports
40GBASE QSFP+ Ports	2
Uplink Ports	Up to 4 ports
Jumbo Frames	Up to 9216 bytes
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 90% noncondensing
Input Voltage	100 to 240V AC
Power Supply	AC or DC
Power Supply Options	AC or DC
Stacking	Yes
Layer 2 Features	Includes VLAN, STP, RSTP, MSTP, LACP
Layer 3 Features	OSPF, BGP
Management	CLI, Web GUI, SNMP
Security Features	DHCP snooping
QoS	8 queues per port, DSCP
Storage Temperature	-40°C to 70°C