Juniper EX4300 Series

Table 14: Uplink Modules in EX4300-48MP and EX4300-48MP-S Switches (Connued)
Uplink Module
Name
Model Number Descripon Supported EX4300
Switches
First Junos OS
Release
4-port 1-Gigabit
Ethernet SFP/
10-Gigabit Ethernet
SFP+ uplink module
EX-UM-4SFPP-MR You can install four
SFP transceivers,
four SFP+
transceivers, or a
combinaon of SFP
and SFP+
transceivers in the
four ports of this
uplink module.
NOTE: You cannot
congure the ports
on the uplink
module in
EX4300-48MP and
EX4300-48MP-S
switches as Virtual
Chassis ports
(VCPs).
• EX4300-48MP
• EX4300-48MP-
S
Junos OS Release
18.2R1
NOTE: Starng in
Junos OS Release
19.1R1, you can
install SFP
transceivers in the
uplink module. In
Junos OS Release
18.2R1 through
Junos OS Release
18.4R1, the uplink
module supported
only SFP+
transceivers.
NOTE: Uplink modules and transceivers are not part of the shipping conguraon. You must
order them separately.
Table 15 on page 64 shows the uplink modules used in 24-port and 48-port EX4300 switches except
EX4300-48MP and EX4300-48MP-S switches. Table 16 on page 65 shows the uplink modules used in
32-port EX4300 switches. Table 17 on page 67 shows the uplink modules used in EX4300-48MP and
EX4300-48MP-S switches.
63