Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility LOG_PFE
ASP_IDS_HOST_RATE_APP
System Log Message Host destination-address (application), event-type ... rate=rate events/sec
Description The indicated event occurred at the indicated rate (events per second) for the indicated
application at the indicated destination IP address. The rate exceeds the intrusion
detection services (IDS) threshold set by the 'threshold' statement at the [edit services
ids rule <rule-name> term <term-name> then logging] hierarchy level. The application
is specified by the 'applications' or 'application-sets' statement at the [edit services ids
rule <rule-name> term <term-name> from] hierarchy level. This message is logged every
60 seconds until the rate no longer exceeds the threshold.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_PFE
ASP_IDS_INV_CLEAR_QUERY
System Log Message CLEAR: Invalid query type received-value expecting expected-value
Description Intrusion detection services (IDS) received a request to clear information from IDS tables.
The request included the indicated type of query, which IDS cannot interpret.
Type Error: An error occurred
Severity critical
Facility LOG_PFE
Action Contact your technical support representative.
ASP_IDS_INV_CLEAR_QUERY_VER
System Log Message CLEAR: Invalid query version received-value expecting expected-value
Description Intrusion detection services (IDS) received a request to clear information from IDS tables.
The request's version number did not match the version number of requests that IDS can
service.
Type Error: An error occurred
Severity critical
Facility LOG_PFE
Action Contact your technical support representative.
ASP_IDS_INV_SHOW_QUERY
System Log Message SHOW: Invalid query type received-value expecting expected-value
Copyright © 2010, Juniper Networks, Inc.76
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English