EasyManuals Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Description Intrusion detection services (IDS) received a request to show information from IDS tables.
The request included the indicated type of query, which IDS cannot interpret.
Type Error: An error occurred
Severity critical
Facility LOG_PFE
Action Contact your technical support representative.
ASP_IDS_INV_SHOW_QUERY_VER
System Log Message SHOW: Invalid query version received-value expecting expected-value
Description Intrusion detection services (IDS) received a request to show information from IDS tables.
The request's version number did not match the version number of requests that IDS can
service.
Type Error: An error occurred
Severity critical
Facility LOG_PFE
Action Contact your technical support representative.
ASP_IDS_LIMIT_FLOW_RATE_BY_DEST
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics and did not
create a new flow, because the flow rate at the firewall exceeded the intrusion detection
services (IDS) limit configured by the 'rate' statement at the [edit services ids rule
<rule-name> term <term-name> then session-limit by-destination] hierarchy level. The
discarded packet contained the indicated information about its protocol (numerical
identifier and name), source (logical interface name, IP address, and port number), and
destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_IDS_LIMIT_FLOW_RATE_BY_PAIR
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics and did not
create a new flow, because the flow rate at the firewall exceeded the intrusion detection
77Copyright © 2010, Juniper Networks, Inc.
Chapter 9: ASP System Log Messages

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
CategorySoftware
LanguageEnglish

Related product manuals