Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

services (IDS) limit configured by the 'rate' statement at the [edit services ids rule
<rule-name> term <term-name> then session-limit by-pair] hierarchy level. The discarded
packet contained the indicated information about its protocol (numerical identifier and
name), source (logical interface name, IP address, and port number), and destination
(IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_IDS_LIMIT_FLOW_RATE_BY_SRC
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics and did not
create a new flow, because the flow rate at the firewall exceeded the intrusion detection
services (IDS) limit configured by the 'rate' statement at the [edit services ids rule
<rule-name> term <term-name> then session-limit by-source] hierarchy level. The
discarded packet contained the indicated information about its protocol (numerical
identifier and name), source (logical interface name, IP address, and port number), and
destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_IDS_LIMIT_OPEN_FLOWS_BY_DEST
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics and did not
create a new flow, because the number of open flows exceeded the intrusion detection
services (IDS) limit configured by the 'maximum' statement at the [edit services ids rule
<rule-name> term <term-name> then session-limit by-destination] hierarchy level. The
discarded packet contained the indicated information about its protocol (numerical
identifier and name), source (logical interface name, IP address, and port number), and
destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
Copyright © 2010, Juniper Networks, Inc.78
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English