Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

ASP_L2TP_MESSAGE_INCOMPLETE
System Log Message IPC message lacked variable portion
Description The Layer 2 Tunneling Protocol (L2TP) did not process an interprocess communication
(IPC) message because the variable portion of the message was missing.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_NO_MEM
System Log Message Unable to allocate memory for L2TP flow for tunnel tunnel-id, session session-id
Description The Layer 2 Tunneling Protocol (L2TP) could not allocate the memory it needed to create
a flow for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_OBJ_CAC_FAIL
System Log Message Unable to allocate object-cache memory for flow (unit unit-id, tunnel tunnel-id, session
session-id)
Description The Layer 2 Tunneling Protocol (L2TP) could not allocate memory from an object cache
for the flow defined by the indicated unit, tunnel, and session.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_STATS_BULK_QUERY_FAILED
System Log Message Number of queries (num-queries) in statistics request exceeded limit (max-queries)
Description The Layer 2 Tunneling Protocol (L2TP) did not process an interprocess communication
(IPC) request for statistics because it included the indicated the number of queries, which
exceeds the limit as indicated.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_STATS_VERSION_INVALID
System Log Message Invalid version received-value on statistics request (expected expected-value)
83Copyright © 2010, Juniper Networks, Inc.
Chapter 9: ASP System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English