Description The Layer 2 Tunneling Protocol process (l2tpd) received a request for statistics with the
indicated version, which is not the indicated, supported version.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_TUN_GRP_ADD_FAIL_ALLOC
System Log Message Unable to add tunnel group for service set service-set: could not allocate ID
Description The Layer 2 Tunneling Protocol (L2TP) could not add a tunnel group for the indicated
service set because it could not allocate an internal ID.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_TUN_GRP_ADD_FAIL_EXISTS
System Log Message Unable to add tunnel group group-id: it already exists
Description The Layer 2 Tunneling Protocol (L2TP) could not add a tunnel group with the indicated
ID because it already existed.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_TUN_GRP_CHG_FAIL_ALLOC
System Log Message Unable to change tunnel group for service set service-set: could not allocate ID
Description The Layer 2 Tunneling Protocol (L2TP) could not change a tunnel group for the indicated
service set because it could not allocate an internal ID.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_L2TP_TUN_GRP_CHG_FAIL_INVLD
System Log Message Unable to change tunnel group group-id: ID is invalid
Description The Layer 2 Tunneling Protocol (L2TP) could not change the tunnel group with the
indicated internal ID, because the ID is invalid.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.84
Junos 10.3 System Log Messages Reference
To Next Page
Loading...