Facility LOG_PFE
ASP_L2TP_TUN_GRP_DEL_FAIL_INVLD
System Log Message Unable to delete tunnel group group-id: ID is invalid
Description The Layer 2 Tunneling Protocol (L2TP) could not delete the tunnel group with the
indicated internal ID, because the ID is invalid.
Type Error: An error occurred
Severity error
Facility LOG_PFE
ASP_NAT_OUTOF_ADDRESSES
System Log Message natpool nat-pool-name is out of addresses
Description Network Address Translation (NAT) services could not allocate an address from the
indicated NAT pool, because no addresses were available.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_PFE
ASP_NAT_OUTOF_PORTS
System Log Message natpool nat-pool-name is out of ports
Description Network Address Translation (NAT) services could not allocate a port from the indicated
NAT pool, because no ports were available.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_PFE
ASP_NAT_POOL_RELEASE
System Log Message natpool release address:port[count]
Description Network Address Translation (NAT) services made the indicated number of ports available
in the pool for the indicated address, starting at the indicated port number.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
ASP_NAT_RULE_MATCH
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name) application: application,
source-interface-nameseparatorsource-address:source-port ->
85Copyright © 2010, Juniper Networks, Inc.
Chapter 9: ASP System Log Messages
To Next Page
Loading...