Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Action Delete active flows to forcibly free memory, or wait for the system to reclaim memory.
Consider creating more service sets among which resources can be divided. Otherwise,
contact your technical support representative.
ASP_SFW_CHANGE_INACTIVITY_TIMER
System Log Message change global inactivity timer to value1 open timeout to value2
Description The global inactivity timer and the open timeout were set to the indicated values.
Type Event: This message reports an event, not an error
Severity critical
Facility LOG_PFE
ASP_SFW_CREATE_ACCEPT_FLOW
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name) application: application,
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type nat-information
Description The packet with the indicated characteristics matched a stateful firewall rule that has
the 'accept' action, and the stateful firewall created a flow. If the flow requires Network
Address Translation (NAT) services, NAT information appears at the end of the message.
The matching packet contained the indicated information about its protocol (numerical
identifier and name), application, source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
ASP_SFW_CREATE_DISCARD_FLOW
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name) application: application,
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The packet with the indicated characteristics matched a stateful firewall rule that has
the 'discard' action, and the stateful firewall created a discard flow. The matching packet
contained the indicated information about its protocol (numerical identifier and name),
application, source (logical interface name, IP address, and port number), and destination
(IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
Copyright © 2010, Juniper Networks, Inc.88
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English