Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity notice
Facility LOG_PFE
ASP_SFW_IP_FRAG_ASSEMBLY_TIMEOUT
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics and all
related IP fragments it had previously received, because all fragments did not arrive within
the four-second reassembly timeout period. The discarded packet contained the indicated
information about its protocol (numerical identifier and name), source (logical interface
name, IP address, and port number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_IP_FRAG_OVERLAP
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics and all
related IP fragments it had previously received, because the contents of two fragments
overlapped. The discarded packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_IP_OPTION_DROP_PACKET
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics, because
the packet contained nonconfigured IP option types. The discarded packet contained
the indicated information about its protocol (numerical identifier and name), source
(logical interface name, IP address, and port number), and destination (IP address and
port number).
Type Event: This message reports an event, not an error
Severity notice
91Copyright © 2010, Juniper Networks, Inc.
Chapter 9: ASP System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English