EasyManuals Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #167 background imageLoading...
Page #167 background image
indicated information about its protocol (numerical identifier and name), source (logical
interface name, IP address, and port number), and destination (IP address and port
number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_UDP_PORT_ZERO
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the User Datagram Protocol (UDP) packet with the
indicated characteristics, because the source or destination port specified in the packet
was zero (0). The discarded packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_UDP_SCAN
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall received an Internet Control Message Protocol (ICMP) error message
from a server running at the indicated destination address and User Datagram Protocol
(UDP) port. The error packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_PFE
ASP_SFW_VERY_BAD_PACKET
System Log Message syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
Description The stateful firewall discarded the packet with the indicated characteristics, because
the packet was malformed. The discarded packet contained the indicated information
103Copyright © 2010, Juniper Networks, Inc.
Chapter 9: ASP System Log Messages

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
CategorySoftware
LanguageEnglish

Related product manuals