Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

BOOTPD_TIMEOUT
System Log Message Timeout duration unreasonable
Description The indicated timeout value was specified for the -t argument on the 'tnp.bootpd'
command line, or no value was provided. The value was not acceptable, so the boot
parameter process (tnp.bootpd) initialized using the default value of 30 seconds.
Type Error: An error occurred
Severity warning
Facility ANY
Action Provide an acceptable value for the -t argument; acceptable values are '1' (second) and
larger.
Copyright © 2010, Juniper Networks, Inc.128
Junos 10.3 System Log Messages Reference