Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CFMD_CCM_DEFECT_UNKNOWN
System Log Message CFM defect: error-message
Description An unknown defect was detected.
Type Event: This message reports an event, not an error
Severity error
Facility ANY
CFMD_PARSE_BAD_SWITCH
System Log Message executable-name: invalid switch: option
Description The enterprise switching process (cfmd) terminated because of an invalid switch.
Type Error: An error occurred
Severity error
Facility ANY
Action Examine the messages that immediately follow this message in the system log for
information about possible causes.
Cause An internal software failure occurred.
CFMD_PARSE_CMD_ARG
System Log Message executable-name: missing argument for switch: option
Description The enterprise switching process (cfmd) terminated because of an internal error.
Type Error: An error occurred
Severity error
Facility ANY
Action Examine the messages that immediately follow this message in the system log for
information about possible causes.
Cause An internal software failure occurred.
CFMD_PARSE_CMD_EXTRA
System Log Message executable-name: extraneous information on command line: option
Description The enterprise switching process (cfmd) terminated because of an internal error.
Type Error: An error occurred
Severity error
131Copyright © 2010, Juniper Networks, Inc.
Chapter 17: CFMD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English