Description The chassis process (chassisd) could not open the indicated file because it could not
obtain its status.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FM_BAD_STATE
System Log Message function-name: unexpected state statetype for SIB#sib-slot
Description The indicated function failed because it encountered the indicated type of unexpected
internal state with respect to the indicated Switch Interface Board (SIB).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR
System Log Message function-name: error-message (SIB#sib-slot, Packet Forwarding Engine pfe on FPC
fpc-slot)
Description During execution of the indicated fabric management routine, the indicated error occurred
between the indicated Switch Interface Board (SIB) and the indicated Packet Forwarding
Engine on the indicated Flexible PIC Concentrator (FPC).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_CLOS_F13_HSR
System Log Message FM: error-message errors occurred on link from F2-f2-sib_SFfrom-fchip_s-port to
F13SIBto-sfc-sib_SF3_to-fchip_d-port on plane sib-plane
Description In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the SFC routing node detected an error in the electrical
path between the indicated port on the indicated F2SIB and F13SIB on the indicated
plane.
Type Error: An error occurred
153Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...
Need help?
General
