Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 216

CHASSISD_FHSR_WRITE_REG_ERROR
System Log Message Fchip: fhsr_write() of value value failed at address address
Description The high-speed receiver (HSR) write routine could not record the indicated value at the
indicated address on an F-chip register.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FHST_READ_REG_ERROR
System Log Message Fchip: fhst_read() failed at address address
Description The high-speed transmitter (HST) read routine failed at the indicated address on an
F-chip register.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FHST_WRITE_REG_ERROR
System Log Message Fchip: fhst_write() of value value failed at address address
Description The high-speed transmitter (HST) write routine could not record the indicated value at
the indicated address on an F-chip register.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FILE_OPEN
System Log Message File open: filename, error: error-code -- error-message
Description The chassis process (chassisd) could not open the indicated file for the indicated reason.
Type Error: An error occurred
Severity critical
Facility LOG_DAEMON
CHASSISD_FILE_STAT
System Log Message File stat: filename, error: error-code -- error-message
Copyright © 2010, Juniper Networks, Inc.152
Junos 10.3 System Log Messages Reference